Daewoo DTQ 20V4SCN User Manual

DTQ 14V1FCN  
DTQ 20V1FCN  
DTQ 14V4SCN  
DTQ 20V4SCN  
P/N:48586001E217-R0  
CONTENTS  
Your TV's Front Panel  
4
5
6
7
7
Your TV's Back Panel  
Your Remote Controls  
Installing your remote control batteries  
Notes  
Connecting an Antenna  
Connecting a Cable System  
Connecting Other Pieces of Equipment  
Safety Note  
8
9
10  
10  
Turning your TV On  
Programming Your TV's Channel Memory  
Changing Channels  
11  
11  
12  
12  
13  
13  
13  
14  
15  
16  
16  
Changing the Volume  
Changing The TV's Channel Memory  
Adding/Deleting a channel to memory  
Displaying the Current Channel  
Changing the TV s Input  
Adjusting Video Settings  
Returning to the factory settings  
Descriptions of video settings  
Setting the Clock  
Setting the Wake-Up Time  
Setting the Off Time  
Canceling the Wake-Up Time or Off Time  
Setting the Sleep Timer  
17  
17  
18  
18  
19  
Changing the Language of the On-Screen Menus  
Captioning  
CC on Mute  
Power Restore  
Parental Control Settings  
Description of Parental Control Settings  
20  
20  
21  
21  
22  
23  
1
S A F E T Y  
PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN  
FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV  
RECEIVER.  
Read all of these instructions.  
This television equipment should be operated only from  
the type of power source indicated on the marking label. If  
you are not sure of the type of power supplied to your  
home, consult your television dealer or local power com-  
pany.  
Save these instructions for later use.  
Unplug this television equipment from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
In case of polarized alternating currency line plug (a plug  
having one blade wider than the other). This plug will fit  
into the power outlet only one way. This is a safety feature.  
If you are unable to insert the plug fully into the outlet, try  
reversing the plug. If the plug should still fail to fit, contact  
your electrician to replace your obsolete outlet. Do not  
defeat the safety purpose of the polarized plug.  
Do not use attachments not recommended by the televi-  
sion equipment manufacturer as they may result in the risk  
of fire, electric shock or other personal injury.  
Do not use this television equipment near water, for exam-  
ple, near a bathtub, washbowl, kitchen sink, or laundry  
tub, in a wet basement, or near a swimming pool, or the  
like.  
Do not allow anything to rest on the power cord. Do not  
locate this television equipment where the cord will be  
abused by persons walking on it.  
Do not place this television equipment on an unstable cart,  
stand, or table. The television equipment may fall, causing  
serious injury to a child or adult, and serious damage to the  
equipment. Use only with a cart or stand recommended  
by the manufacturer, or sold with the television equip-  
ment. Wall or shelf mounting should follow the manufac-  
turer's instructions, and should use a mounting kit  
approved by the manufacturer.  
Follow all warnings and instructions marked on the televi-  
sion equipment.  
For added protection for this television equipment during a  
lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the equipment due to lightning and power-line  
surges.  
An appliance and cart combination should be moved with  
care. Quick stops, excessive force, and uneven surfaces  
may cause the appliance and cart combination to overturn.  
Slots and openings in the cabinet and the back or bottom  
are provided for ventilation and to ensure reliable opera-  
tion of the television equipment; and to protect it from  
overheating, these opening, must not be blocked or cov-  
ered. The opening should never be blocked by placing the  
television equipment on a bed, sofa, rug, or other similar  
surface. (This equipment should never be placed near or  
over a radiator or heat register.) This television equipment  
should not be placed in a built-in installation such as a  
bookcase unless proper ventilation is provided.  
2
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be fatal.  
If an outside antenna or cable system is connected to the  
television receiver, be sure the antenna or cable system is  
grounded so as to provided some protection against volt-  
age surges and built-up static charges.  
Do not overload wall outlets and extension cords as this  
can result in fire or electric shock.  
Never push objects of any kind into this television equip-  
ment through openings as they may touch dangerous volt-  
age points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the televi-  
sion equipment.  
Do not attempt to service this television equipment your-  
self as opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to  
qualified service personnel.  
Unplug this television equipment from the wall outlet and  
refer servicing to qualified service personnel under the fol-  
lowing conditions:  
(a) When the power-supply cord or plug is damaged or  
frayed.  
(b) If liquid has been spilled, or objects have fallen into the  
television equipment.  
(c) If the television equipment has been exposed to rain or  
water.  
(d) If the television equipment does not operate normally by  
following the operating instructions. Adjust only those  
controls that are covered by the operating instructions as  
an improper adjustment of other controls may result in  
damage and will often require extensive work by a quali-  
fied technician to restore the TV receiver to its normal  
operation.  
(e) If the television equipment has been dropped or the  
cabinet has been damaged.  
(f) When the television equipment exhibits a distinct  
change in performance - this indicates a need for ser-  
vice.  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer that have the same characteristics as the  
original part. Unauthorized substitutions may result in fire,  
electric shock or other hazards.  
Upon completion of any service or repairs to this televi-  
sion equipment, ask the service technician to perform safe-  
ty checks to determine that the television is in a safe oper-  
ating condition.  
3
C H A P T E R  
1
Your TV comes with a remote control. The section below summarizes the buttons, controls, and terminals that you  
will use with your TV.  
MENU STAND-BY  
POWER  
CH  
VOL  
EARPHONE  
VIDEO AUDIO  
1
2
3
4
5
6
7
8
9
Use this button to turn your TV on or off.  
Use these buttons to change channels on your TV, or to select items in the menu system.  
Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio  
and video settings.  
Use this button to turn the TV's menu system on and off.  
This indicator lights up when the power is off.  
This receiver receives a signal from your remote control. Do not block it.  
Use this jack to receive a video signal from another A/V component.  
Use this jack to receive an audio signal from another A/V component.  
Use this jack to receive an audio signal from your TV.  
4
Overview of Your Equipment  
ANT  
VIDEO AUDIO  
1
2
3
Use this terminal to attach an antenna or cable system to your TV.  
This terminal allows the TV to receive a video signal from another component, such as a VCR.  
This terminal allows the TV to receive an audio sighal from another component, such as a  
VCR.  
Overview of Your Equipment  
5
2
4
2
4
1
1
3
3
4
4
5
3
5
3
9
9
10  
6
11  
10  
6
11  
8
7
8
7
Use this button to select TV or VIDEO mode.  
Use this button to turn your TV on or off.  
Use this button to display video adjustment  
items.  
Use to turn the TV s sound on and off.  
Use these buttons to change channels on your TV, or select items in the  
menu system.  
Use these buttons to change channels.  
Use these buttons to change your TV's volume, to activate selections in  
the menu system, or to change audio and video settings.  
Use this button to program the TV to turn off after a certain time.  
Use this button to return to the previous channel you were watching.  
Use this button to turn the TV's menu system on and off.  
Use this button to display the channel number and status.  
6
Overview of Your Equipment  
Open the battery compartment on the back of the remote control.  
Install two AA-size batteries (not included) as shown. Make sure the + and - terminals are oriented cor-  
rectly.  
Replace the cover.  
Do not mix different types of batteries, or mix an old and a new battery.  
Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries  
properly; never throw them into a fire.  
Point your remote at the receiver on the center of the front of the TV. Make sure the receiver is not blocked.  
The remote control can operate up to 30 feet away from the TV, if you are directly facing the front of the TV.  
Operating distance diminishes as you move to the sides of the TV.  
Overview of Your Equipment  
7
C H A P T E R  
2
Your TV will provide you with the best performance if you connect it to an external antenna or cable system.  
Follow the directions below make this connection. Please note that you will normally only have to make one of the  
connections shown below, not all of them.  
All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver  
metal post partially surrounded by two plastic tabs. For help in locating the antenna terminal, see Your TV's Back  
Panel on page 5.  
simply press or screw the cable onto the antenna terminal on the  
back of your TV.  
you must use a 300-ohm/75-ohm  
adapter(available at your local electronics store). Place the leads underneath the screws on the adapter, tighten the  
screws, then press the adapter onto the antenna terminal on the back of the TV.  
8
Connecting an Antenna or Cable to Your TV  
You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals  
and one antenna for UHF signals.  
you must obtain a  
combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the  
twin leads underneath the screws on the combiner and tighten the screws. Press the cable from combiner onto the  
antenna terminal on the back of your TV.  
you must obtain a combiner (avail-  
able at your local electronics store). Place one set of twin leads underneath the screws on the combiner and tighten  
the screws. Do the same with the other set of twin leads. Press the cable from the combiner onto antenna terminal  
on the back of your TV.  
If your cable set-up is not described below, please contact your cable company for more information.  
simply press or screw the incoming cable onto  
the antenna terminal on the back your TV.  
Connecting an Antenna or Cable to Your TV  
9
connect the  
incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the  
converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and  
change channels using the converter box.  
follow these steps: Find the primary incoming coaxial cable. Plug this cable into a splitter  
(available at your local electronics store). Connect one coaxial cable between one OUT terminal on the splitter and the  
IN terminal on the converter box. Connect another coaxial cable between the other OUT terminal on the splitter and  
the B-IN terminal on an A/B switch (available at your local electronics store.) Connect a third coaxial cable between  
the OUT terminal on the converter box and the A-IN terminal on the A/B switch. Finally, connect a coaxial cable  
between the OUT terminal on the A/B switch and the antenna terminal on the back of your TV.  
When the A/B switch is in the A position, you need to change channels on the converter box (and your TV should  
be tuned to channel 3 or 4); when the A/B switch is in the B position you can change channels on the TV.  
B
A
IN  
OUT  
Converter Box  
You may want to connect a VCR, laser disc player, satellite receiver, or another type of equipment to your TV. We  
recommend that you follow the instructions included with the piece of equipment you wish to connect.  
If you plan on being away from your home for an extended period of time, or if a thunderstorm is approaching,  
you should unplug your television, and you may wish to disconnect your TV from a rooftop or satellite antenna.  
You do not need to disconnect your TV from a cable system.  
10  
Connecting an Antenna or Cable to Your TV  
C H A P T E R  
3
Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote,  
you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of available channels.  
To turn your TV on, press the POWER button on the remote control. You can also  
use the POWER button on the front panel. Make sure your TV is plugged in before  
you try to turn it on.  
Your TV's memory determines the channels that are available using the CH buttons. If a channel is not in  
memory, you can tune to it with the number buttons, but not with the CH buttons. Follow these steps to pro-  
gram your TV's memory:  
With the TV on, press the MENU button twice, then Set-Up menu will appear.  
Use the CH buttons to selecReception , then use the VOL buttons to selecAir oCable . If  
you connected an antenna to your TV, selecAir ; If you connected a cable system, selecCable .  
Use the CH buttons to selecMemorize Channels , then use the VOL buttons to enter the  
Memorize Channels process. Again press the VOL buttons to begin.  
Press the MENU button to return to Set-Up menu.  
Press the MENU button three times to return to normal TV viewing.  
Your TV's channel memory will not be affected by a power outage. You will not need to re-program the memory  
unless you change the type of cable or antenna connected to your TV.  
1
2
3-1  
Set-Up  
Set-Up  
Set-Up  
Language :  
Reception :  
English  
Air  
Language :  
Reception :  
English  
Air  
Language :  
Reception :  
English  
Air  
Memorize Channels  
Add/Delete Channels  
Input :  
Memorize Channels  
Add/Delete Channels  
Input :  
Memorize Channels  
Add/Delete Channels  
Input :  
TV  
TV  
TV  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
5
3-2  
4
Memorize Channels  
Set-Up  
Air 11  
Language :  
Reception :  
Memorize Channels  
Add/Delete Channels  
Input :  
English  
Air  
Memorizing all air channels.  
Please, stand by.  
TV  
Press MENU to cancel and  
return to Set-Up menu.  
Select  
Adjust  
Next  
Operating Your TV 11  
You can change channels in three ways:  
The CH buttons will take you through all memorized channels, one by  
one. The CH buttons will not access channels that have not been pro-  
grammed into the TV's memory. For more information about programming  
channels into memory, see the section Programming your TV's Channel  
Memory on the previous page.  
1
2
3
The number buttons (0-9) will take you to any channel, even if it has not been  
memorized. To change to a channel, enter its number; the TV will tune to the  
new channel when you enter the second digit of the channel.  
The PREVIOUS button will take you instantly to the last channel you were  
watching.  
To change the volume of the TV set, use the VOL buttons on the remote  
or on the front panel.  
To quickly turn off the sound, press the MUTE button on the remote. The  
MUTE will appear on screen, colored green. To return the volume to its pre-  
vious level, press MUTE again.  
1
2
12  
Operating Your TV  
Your TV's memory determines the channels that are available using the CH buttons. You can add channels to this  
memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number but-  
tons, but you cannot tune to it with the CH buttons.  
If there are just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if  
there are two or more channel memorized, then the Add/Delete Channels function will search the memorized channels  
only.  
Use the number buttons to tune to the channel.  
Press the MENU button twice, then Set-Up menu will display.  
Use the CH buttons to selecAdd/Delete Channels , then use the VOL buttons to enter the Add/Delete  
Channels process.  
If the channel is not in memory, then use the VOL buttons to add the channel from memory.  
If the channel is in memory, then use the VOL buttons to delete the channel from memory.  
If you are going to delete other channel, then press the CH buttons until desired channel is selected. And press  
the VOL buttons to delete the channel.  
Wait 10 seconds, or press the MENU button to return to normal TV viewing.  
2
3
1
Set-Up  
Set-Up  
11  
Language :  
Reception :  
English  
Air  
Language :  
Reception :  
English  
Air  
Memorize Channels  
Add/Delete Channels  
Input :  
Memorize Channels  
Add/Delete Channels  
Input :  
TV  
TV  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
4
5
6
Add/Delete Channels  
Add/Delete Channels  
Add/Delete Channels  
Air 11  
This channel is not in memory.  
Press VOL to add.  
Air 11  
This channel is in memory.  
Press VOL to delete.  
Air 11  
This channel is in memory.  
Press VOL to delete.  
Press CH for other channels.  
Press CH for other channels.  
Press CH for other channels.  
Press MENU to return  
to Set-Up menu.  
Press MENU to return  
to Set-Up menu.  
Press MENU to return  
to Set-Up menu.  
To quickly see the current channel number and status, press DISPLAY button on the remote  
control. The current channel number and status will be displayed.  
Operating Your TV 13  
Normally, your TV displays the signal coming through the antenna terminal. However, If you ve connected another  
component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from  
the component.  
To do this, you will need to switch from the TV input to thLine Input, as follows.  
With the TV on, press the MENU button twice, then set-up menu will appear.  
Use the CH buttons to selecInput .  
Press the VOL buttons to change from TV to Line .  
Wait 10 seconds, or press the MENU button to return to normal TV viewing.  
1
2
3
Set-Up  
Set-Up  
Set-Up  
Language :  
Reception :  
English  
Air  
Language :  
Reception :  
English  
Air  
Language :  
Input :  
English  
Line  
Memorize Channels  
Add/Delete Channels  
Input :  
Memorize Channels  
Add/Delete Channels  
Input :  
TV  
TV  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to the Video/Audio in jack on the  
front your TV, and your TV s back panel at the same time, the former takes precedence of the latter.  
14  
Operating Your TV  
You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow  
these directions:  
With the TV on, press the MENU button. then Video menu will appear.  
ThSettings item will be selected. Use the VOL buttons to turn Settings to Preset or Custom.  
Use the CH buttons to select the video setting you wish to adjust. Descriptions of the video settings are on the  
next page.  
Use the VOL buttons to adjust the video setting to the level you prefer.  
Use the CH buttons to select another video setting to adjust.  
When you are finished, press the MENU button to return to normal TV viewing.  
1
2
3
Video  
Video  
Video  
Settings :  
Custom  
Settings :  
Preset  
Settings :  
Preset  
Contrast :  
Brightness  
Sharpness  
Color  
Contrast :  
Brightness  
Sharpness  
Color  
Contrast :  
Brightness  
Sharpness  
Color  
Tint  
Tint  
Tint  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
4
5
6
Contrast  
Brightness  
Operating Your 15  
If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps :  
With the TV on, press the MENU button. then Video menu will appear.  
Press the VOL buttons to set thSettings to Preset .  
The TV will remember thCustom settings you had previously chosen. When you seSettings to Custom again,  
your previous custom settings will be restored.  
1
2
Video  
Video  
Settings :  
Custom  
Settings :  
Preset  
Contrast :  
Brightness  
Sharpness  
Color  
Contrast :  
Brightness  
Sharpness  
Color  
Tint  
Tint  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
The contrast setting controls the relation between the light and black areas of the screen. If the light areas are too  
bright and are losing details, press the VOL button; if the picture is gray and lacks contrast, press the VOL  
button.  
The brightness settings controls the overall amount of light in the picture. If the picture is too bright, press the  
VOL button; if the picture is too dark, press the VOL button.  
Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiple vertical lines at the  
edges of an object, press the VOL button; if the vertical edges of on-screen objects are fuzzy, press the VOL  
button.  
The color setting controls the intensity of color. If the color is over-saturated, press the VOL button; if the color is  
washed out, press the VOL button.  
The tint setting controls the relationship of red and green in a picture. Tint is especially noticeable in flesh tones. If  
flesh tones seem too red or purple, press the VOL button; if flesh tones are too green, press the VOL button.  
16  
Operating Your TV  
C H A P T E R  
4
Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set  
your TV to turn off after counting down a certain amount of time.  
With the TV turned on, press the MENU button untiTime menu will be displayed.  
The Set Clock item will be selected. Press the VOL buttons to set the clock. If you hold down either  
VOL or VOL button, the corresponding numbers will change more quickly.  
When the clock is set correctly, use the CH buttons to select anotheTime function, or press the  
MENU button to return to normal TV viewing.  
1
2
3
Time  
Time  
Time  
Set Clock :  
:
Set Clock :  
12 : 00 AM  
Set Clock :  
12 : 00 AM  
Wake-Up time :  
Off time :  
:
:
Wake-Up time :  
Off time :  
:
:
Wake-Up time :  
Off time :  
:
:
Sleep Timer :  
0 min  
Sleep Timer :  
0 min  
Sleep Timer :  
0 min  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
If you enter a time in the Wake-Up time setting, your TV will automatically turn on at that time. Follow these  
instructions to set the Wake-Up time .  
After Wake-up Timer turned on the TV set, if user do not input the user control (e.g. remote CH or VOL key)  
within 15 minutes, the TV set will turn off automatically. If user input the user control within 15 minutes, the TV  
set will turn on continuously.  
It is safety feature for prevent from any kind of problem without human control.  
With the TV turned on, press the MENU button untiTime menu will be displayed.  
Use the CH buttons to selecWake-Up time item.  
If you hold down either VOL or VOL button, the corresponding numbers will change more quickly.  
When the setting is correct, use the CH buttons to select anotheTime function, or press the MENU  
button to return to normal TV viewing.  
1
2
3
Time  
Time  
Time  
Set Clock :  
Wake-Up time :  
Off time :  
12 : 00 AM  
:
:
Set Clock :  
Wake-Up time :  
Off time :  
12 : 00 AM  
:
:
Set Clock :  
Wake-Up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
:
Sleep Timer :  
0 min  
Sleep Timer :  
0 min  
Sleep Timer :  
0 min  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Using Timer Functions 17  
If you enter a time in the Off time setting, your TV will automatically turn off at that time. Follow these instruc-  
tions to set the Off time .  
With the TV turned on, press the MENU button untiTime menu will be displayed.  
Use the CH buttons to selecOff time item.  
If you hold down either VOL or VOL button, the corresponding numbers will change more quickly.  
When the setting is correct, use the CH buttons to select another Time function, or press the MENU  
button to return to normal TV viewing.  
1
2
3
Time  
Time  
Time  
Set Clock :  
Wake-Up time :  
Off time :  
12 : 00 AM  
06 : 30 AM  
:
Set Clock :  
Wake-Up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
:
Set Clock :  
Wake-Up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
0 min  
Sleep Timer :  
0 min  
Sleep Timer :  
0 min  
Sleep Timer :  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
If you would like to cancel the Wake-up Time or the Off Time, Press the VOL buttons until the time settings  
return to - -:- - .  
The Wake-Up Time and Off Time will not function correctly unless the clock has been set.  
18  
Using Timer Functions  
The sleep timer allows you to set an amount of time from 15 minutes to 120 minutes.  
TV will count down the amount of time you set, then turn itself off.  
To set the sleep timer:  
With the TV turned on, press the MENU button untiTime menu will be displayed.  
Use the CH buttons to selecSleep Timer item.  
Use the VOL buttons to set the sleep time. Each time you press VOL, you step between the available sleep  
times : 15min, 30min, 45min, 60min, 90min, and 120min.  
When the setting is correct, use the CH buttons to select anotheTime function, or press the MENU button  
to return to normal TV viewing.  
You can also set thSleep Timer during normal TV viewing, simply by pressing the SLEEP button on the remote  
control. This button steps through the available sleep times(see step 3), one by one.  
To cancel the Sleep timer, turn the TV off, or set the sleep time to 0 using one of the methods described above.  
1
2
3
Time  
Time  
Time  
Set Clock :  
Wake-Up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
0 min  
Set Clock :  
Wake-Up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
0 min  
Set Clock :  
Wake-Up time :  
Off time :  
1 2 : 00 AM  
06 : 30 AM  
1 1 : 30 PM  
60 min  
Sleep Timer :  
Sleep Timer :  
Sleep Timer :  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Select  
Adjust  
Next  
Using Timer Functions 19  
C H A P T E R  
5
This section contains descriptions of the more advanced features of your TV.  
You can choose to display the on-screen menus in English, Spanish, French.  
To change the on-screen language:  
With the TV on, press the MENU button twice, then Set-Up menu will appear.  
The Language item will be selected. Press the VOL buttons to select the language you want to use: English,  
Spanish, French.  
To return normal TV viewing, press the MENU button to return to normal TV viewing.  
1
Set-Up  
Language :  
Reception :  
English  
Air  
Memorize Channels  
Add/Delete Channels  
Input :  
TV  
Select  
Adjust  
Next  
Many TV shows containclosed captions . These captions are hidden words that can be displayed on your TV  
screen. There are two types of these words captions usually follow the action on-screen, providing a written  
version of the dialogue, narration, and sound effects text is not usually related to the action on-screen, often pro-  
viding information such as news or weather. A TV program might be providing more than one set of captions or  
one set of text.  
To set your TV to display captions or text.  
With the TV turned on, press the MENU button untiSpecial menu will be displayed.  
The Closed Caption item be selected. To turn captioning on, use the VOL buttons to select Captions  
(C1 or C2) or Text (T1 or T2).  
At the time these instructions were written, only C1 is normally available, but feel free to try the other selec-  
tions.  
Wait 10 seconds, or press the MENU button to return to normal TV viewing.  
Your setting will remain intact until you change it.  
20  
Additional Features  
When the sound is muted, user can select the caption display. It will display the caption content instead of sound  
mute.  
With the TV turned on, press the MENU button untiSpecial menu will be displayed.  
Use the CH buttons to selecCC on Mute item.  
Use the VOL buttons to selecC1 oC2 .  
User can select the On/Off status when the power cord put into the wall outlet. If user have a cable box with AC  
outlet, then user can connect the TV power cord to the AC outlet and control the TV without TV remote control.  
This function is rarely used for home use, so special care is needed while using.  
With the TV turned on, press the MENU button untiSpecial menu will be displayed.  
Use the CH buttons selecPower Restore item.  
Use the VOL buttons to selecOn oOff .  
Additional Features 21  
This item helps parents to set the standard for the programs which their children is going to watch.  
With the TV on, press the MENU button untiSpecial menu will appear.  
Use the CH buttons to selecParental Control item.  
Use the VOL buttons to enter into Parental Control settings.  
Use the number buttons(0-9) to enter your password, then Parental Control menu will be displayed. If this is  
the first time you are using your Parental Control menu, after entering your password you have to remem-  
ber it.  
The Parental Lock feature will be selected. Use the VOL buttons to toggle On oOff .  
Use the CH buttons to select the Parental Control settings you wish to adjust.  
Descriptions of the Parental Control settings are on the next page.  
Use the VOL buttons to adjust the Parental Control settings.  
Use the MENU button to return to the one level up menu.  
1-1  
Special  
Closed Caption :  
CC on Mute :  
Power Restore :  
Parental Control  
Off  
Off  
On  
Enter a new Password  
- - - -  
Repeat the Password  
# # # #  
0-9 : Adjust  
0-9 : Adjust  
Prev.  
Prev.  
Select  
Adjust  
Exit  
1-2  
Parental Control  
Parental Lock : On  
TV Guidelines  
Movie Ratings  
No Rating : Unblock  
Ext. Source : Unblock  
Change Password  
Select  
Adjust  
Prev.  
22  
Additional Features  
Description of Parental Control Settings  
1. The TV Guidelines set the standard for TV programs excluding sports and news.  
Use the CH buttons to select, VOL buttons to adjust. You can set individual  
settings with VOL buttons.  
2. The Movie Ratings set the standard for movie, video, and other media excluding TV programs.  
Use the CH buttons to select, VOL buttons to adjust.  
3. The No Rating item toggles between “Unblock” and “Block”.  
This item determines whether to block or not the programs which are not rated by  
“Movie Ratings ” and “TV Guidelines”.  
Use VOL buttons to change the settings.  
4. The Set Password item let you change the password for entering Parental Control item.  
You had better change the initial password “0000”. Use VOL buttons to enter the  
password in;ut display, and use the number buttons(0-9) to enter new password. After you  
entered the new password, confirmation display will appear. Type again the password.  
1-1  
Parental Control  
1-2  
Rating All FV D L S V  
Parental Lock : On  
TV Guidelines  
Movie Ratings  
No Rating : Unblock  
Ext. Source : Unblock  
Change Password  
TV-MA  
TV-14  
TV-PG  
TV-G  
TV-Y7  
TV-Y  
[
: Block]  
Prev.  
Select  
Adjust  
Prev.  
Select  
Adjust  
2-1  
2-2  
Parental Control  
X
Parental Lock : On  
TV Guidelines  
Movie Ratings  
NC-17  
R
PG-13  
PG  
G
No Rating : Unblock  
Ext. Source : Unblock  
Change Password  
[
: Block]  
Prev.  
NR  
Select  
Adjust  
Prev.  
Select  
Adjust  
3-1  
3-2  
Parental Control  
Parental Control  
Parental Lock : On  
TV Guidelines  
Parental Lock : On  
TV Guidelines  
Movie Ratings  
Movie Ratings  
No Rating : Unblock  
Ext. Source : Unblock  
Change Password  
No Rating : Unblock  
Ext. Source : Unblock  
Change Password  
Select  
Adjust  
Prev.  
Select  
Adjust  
Prev.  
Additional Features 23  
C H A P T E R  
6
Your Daewoo television is designed to give you trouble-free performance for many years. If you have a problem  
with your TV, try the solutions listed below.  
If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an authorized Daewoo  
service center. You can also call Daewoo directly at 1-800-DAEWOO8.  
Make sure the TV is plugged in.  
Make sure the MUTE is not set.  
Make sure the power is on.  
If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in and try again.  
Try another station. If the other stations are OK, it may be a station problem.  
Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.  
See if anything is interfering with the antenna signal.  
Make sure the AIR/CABLE setting is correct.  
Try another station. If the other stations are OK, it may be a station problem.  
Check that the antenna is connected and is in good working order, has no broken wires, and is adjusted correctly.  
Try another station. If the other stations are OK, it may be a station problem.  
Check that the antenna is connected, is in good working order, has no broken wires, and adjusted correctly.  
Try another station. If the other stations are OK, it may be a station problem.  
Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.  
Make sure the AIR/CABLE setting is correct.  
The channel may not be programmed into memory.  
Try another station. If the other station are OK, it may be a station problem.  
Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.  
See of anything is interfering with the antenna signal.  
Make sure the TV is plugged in.  
Make sure there are fresh batteries in the remote control.  
Make sure there is nothing blocking the remote control signal.  
24  
Troubleshooting  

HP Hewlett Packard HP Pavilion LED LCD Monitor 2211x User Manual
Hotpoint Cooktop HUG61X User Manual
GE General Electric Cooktop 49 80413 User Manual
Emerson CEDV800D User Manual
Dell Computer Monitor P2310H User Manual
Creda L153 User Manual
Atlas ATM1900 User Manual
Asus P4P800S X User Manual
ASA Electronics AOM561 User Manual
Acnodes FES7611 User Manual